PRODUCTS

Juganu J.Protect Allegro

 

The Allegro luminary provides general lighting and continuous irradiation of a wide range of pathogens within indoor spaces, including Covid-19, using Safe* UVA (390nm-400nm), while people are in the space.

The Allegro luminary leverages the Juganu Patent Protected LightCell Technology, for the light and the UVA capabilities.

J. Protect Allegro is designed for standard ceiling grid height, such as office environments, open spaces etc.

*24 hours under UVA is equivalent to approx 3 minutes in the outdoors in the sun.

Juganu J.Protect Presto

 

The Presto luminary is multi-mode disinfection and general lighting fixture, which includes the Safe* UVA (390nm-400nm), and adds UVC** (275nm-285nm) disinfection capability for even faster irradiation of a wide range of pathogens, including Covid-19.

The Presto luminary leverages the Juganu Patent Protected LightCell Technology for the light and the UVA capabilities.

J. Protect Presto is designed for standard ceiling grid height, such as office environments, open spaces etc.

*Under UVA mode, 24 hours under UVA is equivalent to approx 3 minutes in the outdoors in the sun.

**Under UVC, spaces are vacated during the irradiation process.

Juganu J.Protect UV-C Operations Process Flow

Once the ‘Operator’ and PIRS devices confirm there is no one in the space, below describes the process highlighted in the below diagram:

1. Operator using mobile device connects to the Room Controller

2. Room Controller communicates with all PRESTO light fixtures within the space to confirm that the embedded Passive Infrared Sensors (PIRS) is working properly

3. The PIRS communicate with the Room Controller that they are operational and that no one is within the space

4. The Room Controller sends a confirmation to the operator’s mobile device that the embedded PIRS are operational and that UV-C disinfection can commence

5. Operator confirms start of UV-C disinfection and has X seconds or minutes to vacate the space

6. PRESTO light fixtures turn ‘RED’ in order to indicate that UV-C disinfection is in process